How to build a custom chair injection machine

A custom chair molding injection machine cost less than $5,000. 

That’s what we did for a chair we needed to make for a friend.

 We had a friend who wanted to use his own chair, but she wanted a custom molding machine that could do it.

We made her a molding for $1,000 and then we put it together in just a couple of days.

The machine has the right amount of flexibility to do a wide range of shapes, but it also has a little bit of wiggle room for different body types and different needs.

The machine is about the size of a garage door.

We drilled a hole in the base of the chair so we could mount it to the wall.

You can mount it anywhere, but we went with the corner of the frame, so we had to take the chair into a shop that specializes in bench seats and then mount it there.

There is a nice metal plate on the front of the machine.

To hold the chair, we drilled holes through the top of the base and drilled two holes in the bottom of the top.

When we put the chair on, we slid it into the machine, and that’s how we got it to do everything.

I bought the machine from a home improvement store in Wisconsin.

The price was very reasonable.

If you are interested in purchasing a custom injection molding chair, you can find one for as little as $5.

It takes a bit of work to get the molding process right, but once you get the machine in there, you will be able to make almost any shape you want to.

Get the DIY chair mold molding project started by joining our Facebook group.

Follow us on Instagram to see more projects like this.